top of page
Filtration
SIMPLEX FILTER.png
Our most popular Filter
 The Simplex Filter-LP
 
  • Flow rates up to 5,000 LPH
  • Maximum operating pressure:      414 bar (6,000 psi)
  • Standard MOC is 316/316L.
  • Elements are pleated 316 SS.
  • Standard ports are 1/2" FBSPP or 1/2" FNPT
SLIMPLEX HP.png
 
 Simplex Filter-HP
 
  • Flow rates up to 5,000 LPH
  • Maximum operating pressure        690 bar (10,000 psi)
  • Standard MOC is 316/316L.
  • Elements are pleated 316 SS.
  • Standard ports are SF562CX Medium Pressure for use with 9/16" Tubing
UHP FILTER.png
 Simplex-UHP
 
  • Flow rates up to 3,000 LPH
  • Maximum operating pressure       931 bar (13,340 psi)
  • Standard MOC is 316/316L.
  • Elements are pleated 316 SS
  • Standard ports are SF562CX
  • Medium Pressure for use with 9/16" Tubing
LPI.png
LPI Filter
 
  • Flow rates up to 1,000 LPH
  • Maximum operating pressure:      350 bar (5,075 psi)
  • Standard MOC is 316/316L.
  • Elements are pleated 316 SS.
  • Standard ports are 1/4" FBSPP or 1/4" FNPT
LPI-2.png
​The LPI-2 Filter
 
  • Flow rates up to 1,000 LPH
  • Maximum operating pressure:      690 bar (10,000 psi)
  • Standard MOC is 316/316L.
  • Elements are pleated 316 SS.
  • Standard ports are SF562CX Medium Pressure
dual filter 2a.png
The Dual Filter Assembly

The dual filter is the perfect solution for chemical injection filtration projects. 

The design allows for changing out filter elements without shutting
down the injection system. One side is always filtering, when its time to change the filter that is in operation, just switch the handle over to the fresh unused filter. Now the used filter can be replaced safely without shutting down the injection system. 
Snap60.jpg
Filter Elements
 
All Simplex filters are supplied with Pleated 316 SS Sintered metal fiber felt filter elements. The pleated design allows for a very large filtration surface area. This allows for better filtration and longer element life
PLEATED ELEMENT  - 1071.png
Picture1.png

Strainer/Low Pressure Filter

 

The Amflow® Strainer is designed to be used upstream of the injection pump (Suction Side).

It also can be used as a Low-Pressure Filter downstream (Discharge Side) of the injection pump.

Snap135.png
bottom of page